

The Ethernet test engine XGT200 provide a complete test for next generation Ethernet solution. There are many different test modules, it can help clients to verify the performance of their Ethernet. XGT-200 have two 10/100 / 1000Mb / s RJ45, two 100 / 1000M SFP and two 10Gbps SFP + it can generate test profession streams that you need and analyze them, then provide the test result. XGT-200 provide install and maintain services and activate new profession service. XGT-200 can provide many kinds of test functions, it can help you to control and know the quality of your Ethernet
Features
l Smart and durable, field application ready
l HD color touch screen, sun readable
l User-friendly user interface
l PC remote control
l Test profiles and data management, USB / FTP transfer
l Lithium battery up to 4 hours continuous testing
Functions:
l 10GE SFP + x2, 10/100 / 1000BASE-T RJ45 x2,100 / 1000BASE-X SFP x2
l 10M ~ 10Gb / s bandwidth, LAN and WAN mode
l RFC2544 and Y.1564 test
l Layer 1/2/3/4 BERT test
l Multi-stream traffic generation and analysis
l Packet capture
l VLAN and VLAN Q-in-Q test
l MPLS test with multiple MPLS tags
l ODT test
l CoS and ToS / DSCP priority testing
l Statistical analysis report
l Ethernet and advanced IP connectivity test
RFC2544
ITU-T Y.1564
Service Configuration Test
Service Performance Test
BERT
Q-IN-Q
Multiple Stream Generation & Analysis
SPECIFICATION
OPTICAL INTERFACE | |||||||
Available wavelengths (nm) | Two ports : 100M and GigE (850? 1310? 1550) | ||||||
| 100 | 100 | 1000 | 1000 | 1000 | 1000 | 1000 |
wavelength (nm) | 1310 | 1310 | 850 | 1310 | 1550 | Tx : 1490 | Tx : 1310 |
Tx level (dBm) | -20 ~ -15 | -15 ~ -8 | -9 ~ -3 | -9.5 ~ -3 | 0 ~ 5 | -9.5 ~ -3 | -9.5 ~ -3 |
Rx level sensitivity (dBm) | -31 | -28 | -20 | -22 | -22 | -20 | -20 |
Maximum reach | 2Km | 15Km | 550m | 10Km | 80Km | 10Km | 10Km |
transmission bit rate (Gbit / s) | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 |
Reception bit rate (Gbit / s) | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 | 0.125 |
Tx operational wavelength range (nm) | 1280-1380 | 1261-1360 | 830-860 | 1270-1360 | 1540-1570 | 1480-1550 | 1260-1360 |
measurement | |||||||
Frequency (ppm) | ± 4.6 | ± 4.6 | ± 4.6 | ± 4.6 | ± 4.6 | ± 15 | ± 15 |
Optical power (db) | ± 2 | ± 2 | ± 2 | ± 2 | ± 2 | ± 2 | ± 2 |
Maximum Rx before damage (dBm) | 3 | 3 | 6 | 6 | 6 | 6 | 6 |
Connector | LC | LC | LC | LC | LC | LC | LC |
Transceiver type | SFP | SFP | SFP | SFP | SFP | SFP | SFP |
SFP + (10G) | |||
| 10G Base-SR / SW | 10G Base-LR / LW | 10G Base-ER / EW |
Wavelength (nm) | 850 | 1310 | 1550 |
Tx level (dBm) | -5to-1 | -8 to 0.5 | -4.7 to 4.0 |
Rx level sensitivity (dBm) | -11.1 | -12.6 | -14.1 |
Maximum reach | 300m | 10Km | 40Km |
Tx bit rate (Gbit / s) | 9.95 to 10.03 | 9.95 to 10.03 | 9.95 to 10.03 |
Rx bit rate (Gbit / s) | 9.95 to 10.03 | 9.95 to 10.03 | 9.95 to 10.03 |
Tx operation wavelength range (nm) | 840 to 860 | 1260 is 1355 | 1530 to 1565 |
Measurement accuracy |
|
|
|
Frequency (ppm) | ± 4.6 | ± 4.6 | ± 4.6 |
Maximum rx before (dBm) | 6 | 5 | 5 |
Connector | LC | LC | LC |
Transceiver type | SFP + | SFP + | SFP + |
RJ45 | |||
| Two ports : 10/100 Base-T half / full duplex? 1000 Base-T full duplex automatic or manual detection of straight / crossover cable | ||
| 10 Base-T | 100 Base-T | 1000 Base-T |
Tx bit rate | 10 Mbit / s | 125 Mbit / s | 1 Gbit / s |
Tx accuracy (ppm) | ± 4.6 | ± 4.6 | ± 4.6 |
Duplex mode | Hall and full duplex | Hall and full duplex | full duplex |
Connector | RJ-45 | RJ-45 | RJ-45 |
Maximum (m) | 100 | 100 | 100 |
GENERAL SPECIFICATIONS | |||
screen | 7 inch color LED touch screen (resolution 960 * 480) | ||
Data storage | SD card (8G) | ||
interface | USB , RJ45 | ||
Battery | lithium battery (4400mAh) | ||
Battery life | 4h | ||
Operating temperature | -10 ~ + 50? | ||
Storage temperature | -10 ~ + 70? | ||
Operating humidity | 10% -90% | ||
Storage humidity | 5% -95% | ||
Size | 282 * 186 * 75mm |