shinewaytech OLT-55A-C Optical Loss Tester
- Reference: OLT-55A-C
- Manufacturer: ShinewayTech
The OLT-55 Intelligent Optical Loss Tester combines options such as a stabilized light source, optical power meter, optical loss meter, ORL tester and length meter. Can perform bidirectional loss tests by evaluating Good / Bad. Rich functions, such as flexible configuration and user-friendly design, make the OLT-55 an ideal device for measuring losses and comprehensive evaluation of fiber optic links in FTTx, LAN or CATV networks.
To perform measurements in two directions simultaneously, two exactly the same tester models should be used simultaneously.
Features:
- All in one device: SLS + OPM + OLT + ORL + length measurement,
- Optical power monitoring (automatic beam tracking),
- Bi-directional loss test in one fiber,
- ORL test,
- Assessing correct / incorrect,
- Automatic wave identification / switching (AutoID),
- Remote setting of reference values,
- Internal clock and S / N editable,
- 1000 results memory (CSV) and data management software,
- Data transfer from a PC via USB,
- Automatic saving of results in local / remote / in both units,
- USB charging,
- Over 35 hours of continuous work,
- Multilingual menu,
- It does not heat up
- Launches quickly
- High resolution color display,
- Pocket format, light and easy to use device.
Automatic bidirectional loss tests in one fiber
One button is enough to perform the bidirectional test on both ends of the OLT-55 and on both ends of the fiber. The attenuation is measured automatically with the result on the display, allowing the operator to obtain complete and accurate fiber loss data.
Automatic wavelength identification
Optical power monitoring
Technical parameters | |
Model | OLT-55A-C |
Stabilized Light Source (SLS) | |
Wavelength (± 20) [nm] | 1310/1550 |
Output power [dBm] | ? -4 |
The output mode | CW, 270Hz, 1kHz, 2kHz |
Spectral width [nm] | ? 5 |
Emitter type | FP-LD |
Stability of power | ± 0.05dB / 15min ± 0.10dB / 8h |
Optical power meter | |
Calibrated wavelength [nm] | 850, 1300, 1310, 1490, 1550, 1625 |
Power range [dBm] | -70 to +10 (-60 to +10 @ 850) |
Detector type | InGaAs |
Accuracy | ± 5% ± 0.01nW (± 0.5dB@850) |
Resolution [dB] | 0.01 |
Identification of the MOD [Hz] | 270, 1000, 2000 |
Displayed unit | W / mW / µW / nW / pW / dB / dBm (REF) |
Automatic wavelength identification | YES (with explicit SLS from the company shinewaytech ) |
Optical loss test | |
Communication loss range [dB] | 50 (1550nm, 200km) |
Accuracy of communication loss measurement [dB] | ± 0.25 |
Communication loss measurement time | <2 sec. for wavelength |
ORL test (optional) | |
ORL range [dB] | 0 to 60 (APC connector) |
ORL accuracy [dB] | ± 0.75 (in the range 0 to 50dB) ± 1.5 (in the range 50 to 60dB) |
ORL measurement uncertainty [dB] | ± 0.5 (@ 20dB) |
General parameters | |
Dimensions (width x length x height) [mm] | 80 x 44 x 177 |
Display | Color LCD with backlight |
Weight [g] | 350 |
Power | Lithium battery AC adapter |
Battery operation time [h] | 35 (continuous operation) |
Communication | USB |
Energy saving | Automatic shutdown after 5 minutes of inactivity |
Optical connector | FC (interchangeable with SC, ST) |
Memory | 1000 results |
Working conditions | Ambient temperature: -20 to 50 [° C] Relative humidity: 0 to 95 [%] (no condensation) |
The storage conditions | Ambient temperature: -40 to 70 [° C] Relative humidity: 0 to 95 [%] (no condensation) |
Order
Standard equipment
- Equipment,
- Lithium battery,
- AC adapter / charger,
- USB cable,
- PC OPM Data Analysis software,
- Case,
- Warranty Card,
- CE certificate,
- Calibration certificate,
- User manual.